Final Cleandown (Once Mortar Has Cured)

• Use only clean running water.
• Wash down wall from top to bottom using water and a clean rag or soft bristled brush. Rinse rag/brush (thoroughly) repeatedly. Rinse wall immediately.
• For more difficult areas use as above and add a mild solution of a detergent-type masonry cleaning agent. Always follow the manufacturerÕs directions. Only clean small 1-2 sq. yards, at a time, then rinse area thoroughly.
• Use wooden tool or stick on mortar clumps.
• Do not use acid, abrasive powders or unauthorized cleaners.
• If a power-wash system or steam cleaning process is being used, take special care not to damage the mortar joints. Call the brick/tile manufacturer for psi recommendations.
• Be careful not to etch or yellow mortar joints.
• Do not use sealers or coatings.

Planning Tips

Material Handling Instructions